CABLE (Connect ANT+ to BLE)

$59.95

SKU: CABLE_v1

Product Description


 

 

Specifications

  • Weight: 0.1 lb
  • Width: 1.25 in
  • Depth: 0.5 in
  • Height: 2.25 in

81 reviews

Easy to use, all garmin equipment now connect via Ipad

Posted by Ewen Riddell on March 12, 2019

Zwift easily paired on ipad

Awesome Device

Posted by Kenneth Emery on January 23, 2019

I have all Garmin sensors and wanted to get set up on Zwift. I researched CABLE and the other popular ANT+/BLE converter and decided on CABLE. Ordered on the 19th and received today (23rd) after the holiday weekend. i paid for 2-day shipping. Set up with the app and sensors was relatively painless and obviously intuitive, as I didn’t need to download the NPE instructions to get fully set up with 3 sensors—HR, speed, cadence. And setup with Zwift was really easy. It seemed to take a while for Zwift to recognize the CABLE device, but that could be something on the Zwift end. Regardless, once Zwift picked it up, I was able to connect to a ride on screen in a flash. This is a fantastic little device.

Cable

Posted by Paudie Stack on September 21, 2018

Excellent product easy set up and does what it is supposed to. Take a firm tap to switch on though

CABLE works flawlessly and I love it

Posted by Daniel Macioce on September 11, 2018

The sensors on all of my bikes are ANT+, and I have often wished that there was a way to connect my sensors to apps on my phone. CABLE solves this flawlessly. I can eve use CABLE to complete virtual rides using the Zwift app on my Apple TV! I am very satisfied with it and highly recommend this device.

sven zaalberg

Posted by sven zaalberg on September 8, 2018

s

Cable

Posted by A must have if you live in a Garmin ecosystem on August 20, 2018

I live in both Apple and Garmin worlds. Meaning my sensors are ANT+ and my computers are BLE equipped.
This sensor replaced the USB Ant+ adapter and the long wire it needed and expanded the info displayed on my iPad while using Rouvy.
I use it for HR and cadence broadcast and I have a cycleops Hammer smart trainer.

So easy to use!

Posted by Mitch Thors on August 3, 2018

Allows for seamless use of all my existing ANT+ sensors with Bluetooth devices! A life saver with Zwift on an iPad.

CABLE

Posted by Tommy on August 2, 2018

Easy to set up. Easy to use. Finally connected to my iOS devices!

Performs as advertised

Posted by Tad Koriath on July 30, 2018

Good product. Easily connected my Garmin Vector pedals to my Apple TV via iPhone ap. Can now do my Zwifting on the big screen.

Cable setup & usage

Posted by Fred on July 7, 2018

It took me less then 5 minutes without any documentions to install my CABLE. Wow! It connect to Zwift like any other BLE devices … easy. Unfortunately for me it doesn’t work with my Rotor INPower application. But I think it’s this application that is “picky” on what it connects too. I will try to change the name of the beacon and see if it help but I doubt it.

Zwift

Posted by Caro on June 9, 2018

Got the NPE Cable to use with my Schwinn Bike for Zwift! The videos were easy to follow to get started. Works just as described. Just get confused when the red light turns on, and I can’t figure out what it is connected to. I’ve had to turn off all my Bluetooth to make sure it pairs properly, then I can turn them on again. That would be my only complaint.

Opinion after almost a year of use

Posted by Santiago Pedroza López on June 9, 2018

Hello, I bought the cable a few months ago, I usually use it with a polar v800. At the beginning I had some problems with the pairing of both, problems in part of the cable device and by others of polar v800. After several firmware updates, it now works very well. I have paired garmin devices such as footpod, cadence and speed sensors, I even have the bkool roller connected and it gives me the power in the v800. Very happy with him.

A greeting.